Thermal oil boiler KTM-1.5 Pump High Temp
3 514 000
Enquire conditions
and delivery time
We'll call you back within 15 minutes
Specify your requirements
Send prices and terms of delivery
Котел на раме — 1шт |
Насосный блок с трубной обвязкой на раме под навесом — 1шт |
Шкаф автоматического управления котлом — 1 шт. |
Насос LQRY 100-65-230/2-C, 22кВт (температура теплоносителя до +300оС) — 1 шт. |
Шестерёнчатый насос для закачки масла Ду 25 — шт. |
Ответные фланцы Ду 100 – 2шт, Ду 80 — 1шт. |
Дымовая труба, типа сэндвич, Ду-400, 4 метра — 1шт |
Горелка газовая TBG 210 P |
Gas valve MM420 A20C-R2 |
Аксиальный компенсатор BTGA 2" |
Реле максимального давления |
Горелка дизельная TBL-210P |
Форсунка 20,00х45о SS |
Горелка дизельная FBR FGP 150/2 TL (1744 кВт) |
Расширительный бак 0,4 м.куб |
Расширительный бак 1,0 м.куб |
Расширительный бак 1,5 м.куб |
Расширительный бак 2,0 м.куб |
Расширительный бак 3,0 м.куб |
Бак под дизельное топливо БДТ-0,6 |
Tank for diesel fuel BDT-1 |
Diesel fuel tank BDT-7 |
Tank for diesel fuel BDT-10 |
Tank for diesel fuel BDT-25 |
Котёл термомасляный предназначен для нагрева термального масла до температуры +350 °С с избыточным давлением до 0,2 МПа (2 кгс/см²) и служит для теплоснабжения технологических процессов по перекачке битума, мазута с использованием коаксиального трубопровода (спутниковый обогрев трубопроводов), прогрева битумных и мазутных ёмкостей посредство закрытых регистров.
The price for the thermal center is presented without a burner
- Not subject to registration with Rostekhnadzor
- Italian components (BALTUR or F.B.R. burners, valves, safety valves, pumps)
- Automatic control
- Mobile installation, completely autonomous
- Casing stainless steel boiler
- Transport dimensions
- 2-year warranty
Technical Features
- Reject hopper capacity (at a density of 1.8 t/m³), m³ (t) 1,5 (1,74)
- Installed power, kW 20
- Reject hopper capacity (at a density of 1.8 t/m³), m³ (t) Reject hopper capacity (at a density of 1.8 t/m³), m³ (t)
- Reject hopper capacity (at a density of 1.8 t/m³), m³ (t) Reject hopper capacity (at a density of 1.8 t/m³), m³ (t)
- Oil heating mode, supply / return, max, O from “Bulgaria" +350/+300
- Time to exit to mode, min 30
- Oil heating mode, supply / return, max, 10
- Diesel burner Baltur 1940
- Diesel burner Baltur 195
- Methane consumption, nm3/hour 206
- Длина (габаритная), мм 7225
- Ширина (габаритная), мм 2395
- Высота (транспортировочная), мм 2550
- Масса, кг (не более) 6,000
- Diesel burner Baltur 90
- Diesel burner Baltur У1
- Kinematic viscosity of isothermal oil at 40 OKinematic viscosity of isothermal oil at 40 Kinematic viscosity of isothermal oil at 40
- Kinematic viscosity of isothermal oil at 40 OKinematic viscosity of isothermal oil at 40 2…10
- Kinematic viscosity of isothermal oil at 40 O from “Bulgaria" 200
- Boiling point of isothermal oil in the open air, not less than, O from “Bulgaria" 300
- Boiling point of isothermal oil in the open air, not less than, O from “Bulgaria" 350
- Connection of branch pipes of supply and return flanged, mm Ду-100
- Connection of branch pipes of supply and return flanged, mm Ду-25
- Connection of branch pipes of supply and return flanged, mm Connection of branch pipes of supply and return flanged, mm
- The horizontal level of the expansion tank must be equal to or higher than the highest point of the entire heating line, as open type expansion tank
Quality
certificates
Products
in stock
Individual configuration
with prices for each item
Mobile
commissioning team
available
Worldwide
delivery
in trucks or containers