SKIP-45 Concrete Plant
6 925 400




Enquire conditions
and delivery time

We'll call you back within 15 minutes

Specify your requirements

Send prices and terms of delivery
2 247 300
- BP-2G-1200 Twin-shaft concrete mixer
- Skip (bucket) to load the mixture with the bottom-gate
- Winch for skip lifting with electric brake
- Pneumolock double
- Connection set for pneumatic equipment
- Manual lubrication system: grease press
- Armor shift flake type. Material: cast iron wear 15 mm
- Спицы усиленные (стальное литье) крепление типа "кулак"
- Changeable blades. Material: ЧХ16Н2Т cast iron (chromic high alloy wear-resistant)
- Electricity to connect the remote control
- Maintenance kit (three armor, blade, needle)
- Concrete mixer machinery certificate
622 200
- Overpass ES 1200.00.00.000. Reinforced structure adapted for unloading concrete at a height of 4,000 mm
- mixer platform with supporting structures
- Ladders for equipment maintenance
- Fence along the perimeter
- Staircase with handrails
- Funnel for unloading concrete with rubber guide
- Skip ways - rails
- Fastening construction for pipes and electric cables
- Hardware for the assembly trestle
- Coating: shotblasting, double coloration with drying chamber
- Total weight - 2385 kg
2 160 400
- Bunkers-inert (2x20). Total volume 40 m³
- Preparation under registers installation for heating inert materials
- Sector valves, with control of pneumatic cylinders - 4 pcs.
- Pneumatic equipment - 4 electric pneumatic distributors, a set of fittings and tubes, 4 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Vibrator MVE3003 - 4 pcs.
- The support frame, installation without foundation
- Inert batcher DI-6 (conveyor) with lined drive drum. Drive power 18.5 kW
- Zink plated rollers
- S-shaped load cells for 2 tons - 4 pcs.
- CAS connecting box
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
628 200
- Support frame (powder coated)
- Cement dispenser, dosage - 500 kg (powder coating):
- Three inlet pipes for augers (two are covered with a lid)
- Connecting outer sheath with collar clamps
- Overpressure system
- Unloading disc damper ∅200
- Strain gauges - 3 pcs.
- Signal amplifier - weight sensor
- Pneumatic distributors - 4 pcs.
- Vibrator MVE41 - 1 pc.
- Water dispenser, dosage - 250 liters (powder coating):
- Strain gauges - 3 pcs.
- Water dump pump
- Signal amplifier - weight sensor
- Chemical additives dispenser, dosage - 30 liters, made of stainless steel:
- Strain gauges - 2 pcs.
- Ball pneumatic valve ∅25 - 1 pc.
- Ball pneumatic valve ∅50 – 2 pcs.
- Signal amplifier - weight sensor
- Software on your own SCADA system complete with a monoblock: accounting for the consumption of materials and equipment operation, remote access and control over the work in the local network
- Automatic operation by pressing "one" button
- Recipe storage database for concrete production
- Programmable Logic Controller
- Сontrol panel case protection - IP54
- Power cabinet case protection - IP54
- Control, protective and switching equipment "Omron", "Siemens"
- Set of diagrams and instruction manual
- Hardware for assembly RBU: metering complex overpass screw silage
- Hardware, accessories
- Wire for screw fixing
- Kit for connecting the database (pnevmotruba, sleeves, bends, RVC 51-70 clamps, duct PVC-5-C-60)
- Limit switch for the database
- Kit vodopodvedeniya (pipe bends, sleeves, T-joints, anchor bolts, brackets)
- Kit RBU pneumatic (air tubing, pnevmotruba, fittings, hardware)
- Set of cables
- Couplings (5 titles)
- compactor
- Acid sealant TempPlus
- Power and control cables, protected by metal hose (in mobile plants they are laid in frame)
- Set of locking sensors and executing mechanisms position sensors (skip, mixer's gate, etc.)
2 359 500
- Бетоносмеситель планетарный MPC 1125
- Mixer drive - 40 kW
- Replaceable wear-resistant armor made of cast iron with a strength of 500HB
- Sector valve with rubber seal equipped with hydraulic drive valve with hydraulic drive and oil station
- Inspection hatches are equipped with an access security system
2 735 700
- Aggregate bins (3 x 20). Total volume 60 m³
- Preparation under registers installation for heating inert materials
- Sector valves, with control of pneumatic cylinders - 6 pcs.
- Pneumatic equipment - 6 electro-pneumatic distributors, a set of fittings and tubes, 6 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Vibrator MVE3003 - 6 pcs.
- The support frame, installation without foundation
- Dispenser inert CI-9 (conveyor) with the lined drive drum. Drive power 18,5 kW
- Zink plated rollers
- S-shaped load cells for 2 tons - 4 pcs.
- CAS connecting box
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
3 554 600
- Bunkers of inert BI-80 (4 x 20) - 8 sections. The total volume is 80 cubic meters. meters
- Preparation under registers installation for heating inert materials
- Pneumatic equipment - 8 electric pneumatic distributors, a set of fittings and tubes, 8 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Vibrator MVE 300/3 - 8 pcs.
- Dispenser inert CI-12 (conveyor) with the lined drive drum. Drive power 18,5 kW
- The soft starter, frequency converter
- Strain gauges - 6 pcs.
- CAS connecting box
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
567 500
- Silo tank (V = 28 m3)
- Mounting frame
- Stairs
- Cover protection enclosure
- Loading pipe d 102 with connection lock
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Machinery certificate
- Lattice for hopper section 70x70 for DKM-36 - DKM-36.10.000
163 400
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- One window (PVC, double glazing), insulated door with lock
- Lighting
- Slinging loops
- Weight - 180 kg
39 400
- The pump Calpeda MXH 202E assembled for chemical supply. additives
- Capacity - 80 liters/min
- Power - 0.33 kW
- Weight - 6.9 kg with packaging
- Machinery certificate
- Emergency pressure relief valve PV273 assy
- Adjusting ring
- Operational documentation
- Cement filter with vibration cleaning FCS-24 NEON assembled
- Filter elements - 14 pieces
- Stainless alloy steel body
- Vibrator - cartridge vibration cleaning system
- Silage setting ring
- Lid
- Machinery certificate
- Butterfly valve DN300
- Handle for gate control
- Operational documentation
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- Two viewing windows (PVC, double glazed windows), insulated door with lock
- Lighting
- Air conditioning
- Operator table
- Operator's chair
- Heater 2kW
- Slinging loops
- Weight 280 kg
913 000
- Silo Tank (V = 50 m3): cover - 4 sectors, cylindrical section - 12 sectors, large cone - 4 sectors, small cone
- Mounting frame
- Stairs
- Cover protection enclosure - 11 sectors
- Loading pipe d 102 with connection lock
- Inspection hatch (Viewing window for inspection and cleaning of the cone)
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Frame for transportation
- Hardware for the assembly of a silo
- Polyurethane sealant Soudaflex FC 40 gray 600ml - 9 tubes
- Machinery certificate
420 200
- Auger assembly
- Pipe Diameter 219 mm Pipe Length 11 500 mm
- Drive: motor-reducer. Power 11 kW
- Inspection window for cleaning and maintenance
- Operational documentation
- Cement level sensor G2 1/2 220V assy in a package
- Adjusting ring
- Operational documentation
CBP operation mode - fully automatic on the principle of "single button".
BP-2G-1200s Twin-shaft concrete mixer is installed on the elevated structure with the discharge height - 4 m. Concrete mixer equipped with a special skip (bucket) for lifting and loading components of the mixture into the mixer.
For storage and precise batching of the inert materials dosing complex DKM-40. Возможна поставка бункеров увеличенного объема (до 80 м³). Инертные загружаются и хранятся в бункерах, количество бункеров 2 по 20 м³, общий объем бункеров 40 м³. Под бункерами установлен ленточный конвейер-дозатор, на котором происходит точное дозирование компонентов, компоненты подаются из бункеров посредством открытия шиберных заслонок, заслонки управляются пневмосистемой.
Upon achievement of the required batch of the inert materials, the conveyor is turned on and they are discharged into mixer's skip. The skip lifts up and the inert materials are discharged into the concrete mixer.
Cement is stored in a special warehouse - a cement silo (not included in the basic package). Silos for cement must be selected the rate of two daily stock performance. For feeding cement from a cement silo dispenser must acquire the correct length screw.
Cement silos, silo piping and augers are always in stock in Zlatoust!
DB-dispenser assembly 45 which includes the dispenser 500 kg of cement, water and 250 liters of dispenser chemical additive 30 liters.
Каждый дозатор расположен на трех высокоточных тензодатчиках и жесткой раме, что повышает точность дозирования. Дозатор цемента снабжен вибратором MVE 300/3 для побуждения схода цемента при его залипании.
All components of the mixture are mixed, after obtaining the necessary homogeneity of the mixture, the pneumatic valve of the concrete mixer is opened and the mixture is supplied to the concrete truck or receiving hopper. Then the cycle repeats.
In one cycle, 0.75 ... 0.8 m³ of ready-made concrete or mortar is produced, the cycle lasts no more than 60 seconds. Plant productivity 35…45 m³ ready concrete or mortar per hour of operation.
ZZBO is the official dealer of SICOMA concrete mixers in Russia and the CIS!
It is possible to supply a concrete plant with a concrete mixer from the manufacturer SICOMA.
CAMOZZI pneumatic gate - two-side
- RBU productivity: up to 45 m³/hour
- Twin-shaft concrete mixer
- Automatic control, "single button" principle
- Transportation in 2 euro trucks
- Reliable imported components
- 2 year full warranty
Technical Features
- Productivity, m³ per hour 30...45
- Automatic operating mode
- BP-2G-1200s Concrete mixer
- Hoppers (number x volume m³) 2 x 20
- Cement silo, t (optional) 22...315
- Pneumatic equipment (Italy)
- ABAC Pole Position L20P Compressor (Italy)
- Design summer
- Load of inert materials into the concrete mixer skip
- Total power, kW 66.9
- Sector gate, pneumatic control
- Dimensions of the basic configuration:
- Weight, kg 15300
- Height, mm 8450
- Width, mm 3700
- Length, mm 15407

Quality
certificates

Products
in stock

Individual configuration
with prices for each item

Mobile
commissioning
available

Worldwide
delivery
in trucks or containers
Geography of supplies 2011-2024
Own production, in-stock products and
professional team allow us guarantee
most competitive prices, shortest
possible delivery time and high-quality goods