SKIP-30 Concrete Plant
5 293 500
Enquire conditions
and delivery time
We'll call you back within 15 minutes
Specify your requirements
Send prices and terms of delivery
1 549 600
- BP-2G-750 Twin-shaft concrete mixer
- Skip (bucket) to load the mixture with the bottom-gate
- Concrete plant COMPACT-30 - photo 108
- Shutter - double sided
- Connection set for pneumatic equipment
- Armor shift flake type. Material: cast iron wear 15 mm
- Спицы усиленные (стальное литье) крепление типа "кулак"
- Changeable blades. Material: ЧХ16Н2Т cast iron (chromic high alloy wear-resistant)
- Устройство равномерного распределения воды с присоединительным диаметром 2"
- Electricity to connect the remote control
- Maintenance kit (three armor, blade, needle)
- Purchased parts machinery certificates
- Concrete mixer machinery certificate
642 900
- Overpass E 08.00.000. Design enhanced, adapted for the discharge of concrete on the height of 4000 mm
- mixer platform with supporting structures
- Ladders for equipment maintenance
- Fence along the perimeter
- Staircase with handrails
- Funnel for unloading concrete with rubber guide
- Skip ways - rails
- Fastening construction for pipes and electric cables
- Hardware for the assembly trestle
- Coating: shotblasting, double coloration with drying chamber
- Total weight - 2120 kg
- Software on your own SCADA system complete with a monoblock: accounting for the consumption of materials and equipment operation, remote access and control over the work in the local network
- Automatic operation by pressing "one" button
- Recipe storage database for concrete production
- Programmable Logic Controller
- Сontrol panel case protection - IP54
- Power cabinet case protection - IP54
- Control, protective and switching equipment "Omron", "Siemens"
- Set of diagrams and instruction manual
1 384 300
1 333 333
- Bunkers-inert BI-16 (2 x 8) - 2 sections. The total volume is 16 cubic meters. meters
- Preparation under registers installation for heating inert materials
- Sector valves, with control of pneumatic cylinders - 2 pcs.
- Pneumatic equipment - 2 electric pneumatic distributors, a set of fittings and tubes, 2 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Вибратор MVE300\3 - 2 шт.
- The support frame, installation without foundation
- Дозатор инертных ДИ-6 (конвейер) с футерованным приводным барабаном. Мощность привода 5,5 кВт
- Zink plated rollers
- Тензодатчики SBA-2T "Cas" (Ю. Корея) - 4 шт.
- Коробка соединительная "CAS" (Ю. Корея)
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
582 000
- Mounting frame (powder coating). Weight - 150 kg
- Cement dispenser, a dosage - 300 kg (powder coating):
- Two inlet nozzles for screw conveyors (one is covered by a cap)
- Connecting outer sheath with collar clamps
- Overpressure system
- Unloading disc damper ∅200
- Load cells Cas BSA500 - 3 pcs.
- Signal amplifier - weight sensor
- Pneumatic distributors - 3 pcs.
- Vibrator MVE 300/3 - 1 pc.
- Water dispenser for 150 liters (powder coating):
- Load cells Cas BSA500 - 3 pcs.
- Water and chemical agents multipoint injection system
- Water dump pump
- Signal amplifier - weight sensor
- Сhemical additives dispenser, dosage - 20 liters, made of stainless steel:
- Strain gauges Cas BСA100 - 1 pc.
- CAMOZZI d 50 discharging ball pneumatic damper
- Signal amplifier - weight sensor
- Hardware for assembly RBU: metering complex overpass screw silage
- Hardware, accessories
- Wire for screw fixing
- Kit for connecting the database (pnevmotruba, sleeves, bends, RVC 51-70 clamps, duct PVC-5-C-60)
- Limit switch for the database
- Kit vodopodvedeniya (pipe bends, sleeves, T-joints, anchor bolts, brackets)
- Kit RBU pneumatic (air tubing, pnevmotruba, fittings, hardware)
- Set of cables
- Couplings (5 titles)
- compactor
- Acid sealant TempPlus
- Power and control cables, protected by metal hose (in mobile plants they are laid in frame)
- Set of locking sensors and executing mechanisms position sensors (skip, mixer's gate, etc.)
2 235 800
- Twin-shaft concrete mixer MSO 750
- Multi-channel uniform water spray system
- Replaceable wear-resistant Ni-Hard cast iron armor, strength 500 HB
- Pneumatic gate - two-side
- Electricity to connect the remote control
- Connection set for pneumatic equipment
1 828 400
- Planetary concrete mixer MPC 750
- Mixer drive - 22 kW
- Replaceable wear-resistant armor made of cast iron with a strength of 500HB
- The sector valve with rubber seal is equipped with a hydraulic drive with the possibility of manual opening
- Water treatment system with water spray nozzles
- Inspection hatches are equipped with an access security system
1 751 900
1 708 333
- Bunker-inert BI-24 (3 x 8) - 3 sections. The total volume of 24 cc. meter
- Preparation under registers installation for heating inert materials
- Sector gates, controlled by pneumatic cylinders - 3 pcs.
- Pneumatic equipment - 3 electric pneumatic distributors, a set of fittings and tubes, 3 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Вибратор MVE 300/3 - 3 шт.
- The support frame, installation without foundation
- Dispenser inert CI-9 (conveyor) with the lined drive drum. Drive power 7.5 kW
- Zink plated rollers
- Тензодатчики SBA-2T "Cas" (Ю. Корея) - 4 шт.
- Коробка соединительная "CAS" (Ю. Корея)
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
3 297 750
- Bunkers of inert BI-80 (4 x 20) - 8 sections. The total volume is 80 cubic meters. meters
- Preparation under registers installation for heating inert materials
- Pneumatic equipment - 8 electric pneumatic distributors, a set of fittings and tubes, 8 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Vibrator MVE 300/3 - 8 pcs.
- Dispenser inert CI-12 (conveyor) with the lined drive drum. Drive power 18,5 kW
- The soft starter, frequency converter
- Strain gauge - 6 pcs.
- Коробка соединительная "CAS" (Ю. Корея)
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
2 492 200
- Aggregate bins (3 x 20). Total volume 60 m³
- Preparation under registers installation for heating inert materials
- Sector valves, with control of pneumatic cylinders - 6 pcs.
- Pneumatic equipment - 6 electro-pneumatic distributors, a set of fittings and tubes, 6 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Vibrator MVE3003 - 6 pcs.
- The support frame, installation without foundation
- Dispenser inert CI-9 (conveyor) with the lined drive drum. Drive power 18,5 kW
- Zink plated rollers
- Тензодатчик BSA-2 "Cas" (Ю. Корея) - 4 шт.
- Коробка соединительная "CAS" (Ю. Корея)
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
646 000
- Silo tank (V = 28 m3)
- Mounting frame
- Stairs
- Cover protection enclosure
- Loading pipe d 102 with connection lock
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Machinery certificate
- Calpeda NM 40-12 FA pump assembly for water supply
- Capacity - 550 liters/min
- 1.1 kW power
- Weight - 27 kg with packaging
- Machinery certificate
- Lattice on the section of the bunker 100x100 for DKM-80 (DKM-60) - DKS-16.09.000
- Lattice on the bunker section 100x100 for DKM-80 (DKM-60) - DKM-80.23.000-01-T
39 400
- The pump Calpeda MXH 202E assembled for chemical supply. additives
- Capacity - 80 liters/min
- Power - 0.33 kW
- Weight - 6.9 kg with packaging
- Machinery certificate
155 000
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- One window (PVC, double glazing), insulated door with lock
- Lighting
- Slinging loops
- Weight - 180 kg
25 320
- Aeration jet - 6 pcs
- Assembly kit (fittings, tees, polyurethane tube, bracket, nipple, gasket, plug)
- Filter regulator - 1 pc.
- Ball valve G1/4 - 2pcs
- Axial pressure gauge, 0-2.5 bar - 1 pc.
- 3/2 distributor G1/4, unilateral. - 1 PC
- Solenoid - 1 pc
- Solenoid connector - 1 pc
28 260
- Aeration jet - 8 pcs
- Assembly kit (fittings, tees, polyurethane tube, bracket, nipple, gasket, plug)
- Filter regulator - 1 pc.
- Ball valve G1/4 - 2pcs
- Axial pressure gauge, 0-2.5 bar - 1 pc.
- 3/2 distributor G1/4, unilateral. - 1 PC
- Solenoid - 1 pc
- Solenoid connector - 1 pc
1 376 000
- Heat generator TGV-250 basic version
- Fan assembled with an electric motor type Fan VR 140-15 No. 8 version 1, 22 kW, 3000 rpm, left. 270. 380/660
- The automation system (control cabinet)
- chimney section
- Schild in the control cabinet
- Passport and Manual
- Butterfly valve DN300
- Handle for gate control
- Operational documentation
- Cement level sensor G2 1/2 220V assy in a package
- Adjusting ring
- Operational documentation
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- Two viewing windows (PVC, double glazed windows), insulated door with lock
- Lighting
- Air conditioning
- Operator table
- Operator's chair
- Heater 2kW
- Slinging loops
- Weight 280 kg
- Emergency pressure relief valve PV273 assy
- Adjusting ring
- Operational documentation
- safety valve
- Adjusting ring
- Material - Carbon Steel
- Compound - a collar
- Passport to Safety Valve
1 029 700
- Silo Tank (V = 50 m3): cover - 4 sectors, cylindrical section - 12 sectors, large cone - 4 sectors, small cone
- Mounting frame
- Stairs
- Cover protection enclosure - 11 sectors
- Loading pipe d 102 with connection lock
- Inspection hatch (Viewing window for inspection and cleaning of the cone)
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Frame for transportation
- Hardware for the assembly of a silo
- Polyurethane sealant Soudaflex FC 40 gray 600ml - 9 tubes
- Machinery certificate
1 155 000
- Silo bank (V=50m³)
- Mounting frame
- Stairs
- Cover protection enclosure
- Loading pipe d 102 with connection lock
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Machinery certificate
365 800
- Auger assembly
- Pipe Diameter 219 mm, length of the pipe 10 000 mm
- Drive: motor-reducer. Power 11 kW
- Inspection window for cleaning and maintenance
- Operational documentation
401 900
- Auger assembly
- Pipe Diameter 219 mm, length of the pipe 10 000 mm
- Drive: motor-reducer. Power 11 kW
- Inspection window for cleaning and maintenance
- Operational documentation
CBP operation mode - fully automatic on the principle of "single button".
BP-2G-750s Twin-shaft concrete mixer is installed on the elevated structure with the discharge height - 4 m. Concrete mixer equipped with a special skip (bucket) for lifting and loading components of the mixture into the mixer.
For storage and precise batching of the inert materials metering complex DKS-16. Возможна поставка бункеров увеличенного объема (до 80 куб. метров). Инертные загружаются и хранятся в бункерах, количество бункеров 2 по 8 куб. метров, общий объем бункеров 16 куб. метров. Под бункерами установлен ленточный конвейер-дозатор, на котором происходит точное дозирование компонентов, компоненты подаются из бункеров посредством открытия шиберных заслонок, заслонки управляются пневмосистемой.
При наборе необходимой дозы инертных, включается конвейер и отдозированные компоненты подаются в скип (ковш) бетоносмесителя. Скип поднимается и подает компоненты в смесительную камеру бетоносмесителя.
Cement is stored in a special warehouse - a cement silo (not included in the basic package). Silos for cement must be selected the rate of two daily stock performance. For feeding cement from a cement silo dispenser must acquire the correct length screw.
Cement silos, silo piping and augers are always in stock in Zlatoust!
Цемент подается в блок дозаторов в блок дозаторов БД-30, который состоит из дозатора цемента на 300 кг, воды на 150 литров и дозатора химической добавки на 20 литров. Каждый дозатор расположен на трех высокоточных тензодатчиках “CAS” и жесткой раме, что повышает точность дозирования. Дозатор цемента снабжен вибратором MVE 300/3 для побуждения схода цемента при его залипании.
Происходит перемешивание всех компонентов смеси, после получения необходимой гомогенности смеси, открывается пневмозатвор бетоносмесителя и смесь подается в автобетоновоз или приемный бункер. Далее цикл повторяется.
One cycle lasts for 60 seconds maximum during which 0.5-0.6 cu m of ready-to-use concrete is produced. Plant's capacity is 20-30 cu m per hour of operation.
ZZBO is the official dealer of SICOMA concrete mixers in Russia and the CIS!
It is possible to supply a concrete plant with a concrete mixer from the manufacturer SICOMA.
- Capacity: 30 cu m per hour
- Twin-shaft concrete mixer
- Software on our own SCADA system complete with a monoblock: accounting of material consumption and equipment operation, remote access and control over the work
- Transportation in 2 euro trucks
- Reliable imported components
- 2 year full warranty
Technical Features
- Capacity, cu m per hour 20...30
- mode auto
- Concrete mixer BP-2G-750s
- Bunkers (number x volume m3) 2 x 8
- Cement silo, t (optional) 22...120
- Pneumatic equipment (Italy)
- ABAC Pole Position L20P Compressor (Italy)
- Design summer
- Load of inert materials into the concrete mixer skip
- Total power, kW 50.1
- prison sector, pneumatic control
- Weight, kg 10,250
- Height, mm 7,500
- Width, mm 3,600
- Length, mm 18,000
Quality
certificates
Products
in stock
Individual configuration
with prices for each item
Mobile
commissioning team
available
Worldwide
delivery
in trucks or containers